Essential Tips for Making Your Mix Fit for Mastering

Most of the mixing engineers and musicians are unaware of the fact that the best way to prepare the songs is the mastering. Here are some of the tips that cover the issues that mastering engineers use with the mixes. Maybe there are some of the exceptions, but for some of the commercially released music albums, these following tips will be helping the mastering engineer to work in a possible manner and make the mixing of the songs,

DSC_0080

  1. Remove the master bus compression. Equalization and limiting

In most of the times, the mastering engineers pre-master the tracks to get the better sound of the tracks. While the pre-master make a good sound, but the addition of the master bus makes the process difficult or impossible for the engineer to bring out a great mastering effect to the songs. In some of the rare cases, engineers do often use the special processor or the plug-in on the master bus to bring out the effect. If, this is the matter, be sure that you are notifying the engineer when you are sending the project.

  1. Keep the maximum levels of each of the tracks between -3db to -6db-

By providing the maximum headwork to the mastering engineer for working, this will allow giving the better master. You will not require any type of clipping on the soundtracks in the mix. It is very important to be sure that each of the tracks has the enough headroom. Do not just lower down the master bus, lower down each of the single tracks in the mix.

  1. Reduce the noise in the mix-

One of the most important mastering services includes lowering the noise on the mix. With the best use of the mastering process, you can make the song louder and reduce all type of imperfections that are not noticeable in the case of mixing the sound. If you are hearing the noise in the mix, you will be hearing the same in the mastering. All the mastering engineers eliminate the noises; however, you will get a much better sound after mastering the sound.

  1. Submit the highest resolution file that you are having-

You have to be sure that you are submitting the files to the engineer that are having the highest resolution in which they are mixing the files. Generally, most of you may be submitting the files of 24 bit, WAV or the .AIF file format. These files are not converted and non-compressed and will provide the engineer the best possible way for mastering the audio tracks.

These are some of the tips that are given to the engineer for the best possible type of mastering services they can provide to the clients. There are various online mastering studios that provide effective solutions to the musicians.

D

Advertisements